ISOLATION TRANSFORMERS
ODT SERIES FOR LABORATORY USE
ODT is a separating and filter transformer suitable for galvanic separation of the appliance from the sources. This transformer can be used for testing and measuring of end consumers at 230VAC / 50Hz. After this is suitable for the separation of testing or measuring instruments in laboratories such as oscilloscopes or signal generators. There is possible with more oscilloscopes measure multiple recipients with different potentials. It partially replaces the expensive active probe.

SIZES FROM 50 UP TO 750VA

Sizes are associated with power types. These are available in outputs of 50, 120, 250, 500 and 750VA. The first variant with one output is from 50 to 120VA. From 250 to 750VA is a larger variant with 2 outputs. In this case, the two sockets are not separated but are connected directly.

STACKABLE POSSIBILITIES

The isolating transformer is structurally designed so that it can be placed on top of each other without limiting its full use.

DESIGN MINIMALIST & ROBUST

The whole construction is designed to be minimalist, resistant to demanding laboratory conditions and at the same time was beautiful in design. We are able to offer the product under the OEM variant in almost any color variant.

SOCKET TYPE E & F (SCHUKO)

Two variants of output sockets are available as standard. Type E (upper variant) and type F (lower variant). Aba types are placed in the construction in 90 degrees to ensure good connectivity of rectangular sockets even in the case of multiple modules on top of each other.

FILTERING OF INPUT HARMONICS

The integrated filter element ensures the elimination of input harmonic currents. They also contribute when used as an audio filter element.

LEAKAGE GROUND MEASURING

As standard, in the case of an isolating transformer, the input earth conductor PE is separated from the output one. Thus, complete galvanic separation is achieved. For other possibilities and uses, we have connected these ground points to the terminals located on the rear panel. Thanks to this, it is possible to connect or measure earth leakage currents for special purposes.

INDUSTRIAL PROTECTION

Our entire design, like most of our products, is industrially protected. The product may be manufactured as an OEM version or may be licensed.

DIMENSIONS & WEIGHT

SINGLE SOCKET

ODT10050xP - 50VA - 1650g
ODT10120xP - 120VA - 2150g

DOUBLE SOCKET

ODT10250xP - 250VA - 3500g
ODT10500xP - 500VA - 5000g
ODT10750xP - 750VA - 7250g

CONTROLS